
Model Number Legend
SS-
1 2 3 4 5
1.
Ratin g s
3.
Maximum Operatin g Force (see note)
5.
Terminals
10: 10.1 A at 125 V AC
5: 5 A at 125 V AC
01: 0.1 A at 30 V DC
None: 150 gf
-F: 50 gf (0.1A and 5A v ersions)
-E: 25 gf (0.1A v ersions)
None: Solder terminals
T: Q u ick-connect terminals (#110)
D: Straight PCB terminals
D1: Left-angled PCB terminals
2.
Actuator
None: Pin pl u nger
GL: Hinge le v er
GL13: Sim u lated roller le v er
GL2: Hinge roller le v er
4.
Contact Form
None: SPDT
-2: SPST-NC
-3: SPST-NO
D2: Right-angled PCB terminals
Note: These OF v al u es are for the pin pl u nger models.
Cons u lt Omron regarding the follo w ing:
- SPST-NC and SPST-NO v ersions
- High temperat u re v ersions that are rated from -25 ° C to 120°C
- Left and Right angled PCB terminal v ersions
Specifications
■ Characteristics
Operating speed
Operating frequency
Insulation resistance
0.1 mm to 1 m/second (pin plunger models)
Mechanical: 400 operations per minute max.
Electrical: 30 operations per minute max.
100 M Ω at 500 VDC
Contact resistance
150 gf:
50 gf:
25 gf:
SS-10, SS-5 models:
SS-01 models:
SS-5 models:
SS-01 models
SS-01 models
30 m Ω max.
50 m Ω max.
50 m Ω max.
100 m Ω max.
150 m Ω max.
Dielectric strength (See note 2)
Vibration resistance (see note 3)
1,000 VAC (600 VAC for SS-01), 50/60 Hz for 1 minute between terminals of same polarity
1,500 VAC, 50/60 Hz for 1 minute between current-carrying metal parts and ground and between each
terminal and noncurrent-carrying metal parts
Malfunction: 10 to 55 Hz, 1.5 mm double amplitude
Shock resistance (see note 3)
Degree of protection
Degree of protection against
electric shock
150 gf:
50 gf and 25gf:
IEC IP40
Class I
Destruction: 1,000 m/s 2 (approx. 100G) max.
Malfunction: 300 m/s 2 (approx. 30G) max.
Destruction: 500 m/s 2 (approx. 50G) max.
Malfunction: 200 m/s 2 (approx. 20G) max.
Proof tracking index (PTI)
Ambient operating temperature
Ambient operating humidity
175
-25 ° to 85 ° C (at 60% RH max.) with no icing
85% max. (for 5 ° C to 35 ° C)
Service life
Mechanical:
Electrical:
30 million operations min. at 60 operations per minute (SS-01, SS-5)
10 million operations min. at 60 operations per minute (SS-10)
200,000 operations min. at 30 operations per minute (SS-01, SS-5)
50,000 operations min. at 30 operations per minute (SS-10)
Weight
Approx. 1.6 g pin plunger type
Note: 1. Data shown are of initial value.
2. The dielectric strength values shown is measured using a separator between the switch and metal mounting plate.
3. For pin plunger models, the above value apply for use at the free position and total travel position. For the lever models, the values apply
at the total travel position.
96
Snap Action Switch
SS